Care & Maintenance

">

">

">

">

Due to the non-porous surface of the finish, there is no need to use abrasive cleaners. Any household liquid detergent will provide excellent results. To remove mineral stains, use a mild acid solution such as a liquid bowl cleaner. All organic coatings must cure. They start to cure from the time of the application for a total of approximately 30 days, so towel dry the drain area after each use for a period of one month.                                         DONT'S * DO NOT use the surface for a period of 24 hours upon completion of the job. * DO NOT lay soap bottles or any objects on the finish for 24 hours * DO NOT use abrasive cleaners like AJAX, COMET, SOFT-SCRUB etc.... * DO NOT use loose bath mats with suctions underneath or "stickies". Use FLAT MATS only or one of DVARS anti-skid surfaces. To clean the bathtub, use LYSOL TUB AND TILE CLEANER or any BUBBLING/FOAMING cleaner and a sponge. FANTASTIC and 409 also work well.